A200 Dual Antenna Heading Receiver
A200 Dual Antenna Heading Receiver
Description
Developed independently by ComNav Technology Ltd., A200 is an advanced
generation high-precision integrated GNSS positioning and heading receiver.
With full constellation tracking capability, it provides high-precision positioning
and heading data. The built-in datalink has low power consumption and long
working range. Featuring its compact design and light weight, the A200 is easy
to install. The A200 GNSS receiver can be widely used in precision agriculture,
machine control, fleet management, robot and other industries.
Features
- Highly integrated and compact positioning
and heading solution, easy to install - Built-in new generation K8 positioning
and heading module - IP67 waterproof and dustproof, suitable for
various harsh environments - Aluminum-magnesium alloy housing
is rugged and durable - Equipped with the latest IMU, A200 can ensure
the output of heading in case of signal loss
Additional information
Weight | 0.627 kg |
---|---|
Dimensions | 46 × 3.8 × 5.8 cm |
Positioning | Channels – 1226, GPS – L1C/A, L2C, L2P, BDS – B1I, B2I, B1C, B2b, GLONASS – G1, G2, Galileo – E1, E5b, QZSS – L1C/A, L2C, SBAS – L1C/A |
Data Processing | Positioning data output rate – 1Hz, 2Hz, 5Hz, 10Hz, 20Hz, Correction data I/O – RTCM2.x,RTCM3.x, CMR (GPS only), CMR+ (GPS only), Positioning data output – -ASCII: NMEA-0183 GGA, GSA, GSV, RMC, HDT, VHD, ZDA, VTG, GST, GLL; |
Heading | GPS – L1C/A, L2C, L2P, BDS – B1I, B2I, B1C, B2b, GLONASS – G1, G2, Galileo – E1, E5b, QZSS – L1C/A, L2C |
Communication | Datalink – Tx/Rx with full frequency range from 410-470 MHz |
Specifications | Post Processing – 2.5 mm + 1 ppm Horizontal 5 mm +1 ppm Vertical, Single Baseline RTK – 8 mm + 1 ppm Horizontal 15 mm + 1 ppm Vertical, DGPS – <0.4 m RMS, SBAS – 1 m 3D RMS, Standalone – 1.5 m 3D RMS, Velocity accuracy – ≤ 0.02 m/s (PDOP ≤4), Heading Accuracy – (0.15/R¹) °, Roll or Pitch Accuracy – (0.25/R¹) °, Signal acquisition time – Cold start <30s, RTK initialization time – <10s, RTK initialization reliablity, >99.99%, Signal Reacquisition, <1s |
Electrical specifications | Power supply – DC 4.5~12V, Supports – Auto power-on, Power consumption – 2.6W (typical value), Communication interfaces – 1 serial port and 1 USB port (7-pin Lemo connector) |
Physical | Housing material – Aluminum-magnesium alloy |
Environmental characteristics | Dustproof and waterproof – IP67, Shock – Survive a 2 m drop onto concrete, Humidity – 100% fully sealed, anti-condensation, Operating temperature – -30 °Cto +65 °C, Storage temperature – -30 °Cto +65 °C |
Reviews
There are no reviews yet.