AT340 Geodetic Antenna
AT340 Geodetic Antenna
Description
The AT340 is a super performance GNSS Antenna that can track
GPS, GLONASS, BeiDou, Galileo, L-Band and SBAS. Its high gain
and wide beam provide good signal tracking performance even
satellites at low elevation angle. It is a good choice for customers to
develop systems or solutions for land survey, agriculture, construction
and deformation monitoring.
Features
- Support GPS L1/L2/L5, GLONASS L1/L2 and BeiDou
B1/B2/B3 Galileo E1/E5a/E5b/AltBoc, L-Band and SBAS - Multi-feed design provides stable phase center and
multipath rejection capability - Its high gain and wide beam width provide good signal
tracking performance when satellites are at low
elevation angle - Water-proof and dust-proof design ensures absolute
seal of kernel parts, capable for work in harsh
environment - Lightning proof circuit inside protects the LNA from
surge immunity
Additional information
Weight | 0.374 kg |
---|---|
Dimensions | 15.2 × 6.2 cm |
Physical | Connector – TNC Female connector |
Antenna | GPS – L1, L2, L5. GLONASS – L1, L2. Beidou – B1, B2, B3, Galileo – E1, E5a, E5b, AltBoc, L-Band, SBAS, Nominal Impedance – 50Ω, Polarization – RHCP, Axial Ratio (90°) – ≤ 3dB |
LNA | LNA Gain – 40dB, Noise Figure – ≤ 2dB, VSWR Output – ≤ 2.0, Operation Voltage – 3 – 18VDC, Operation Current – ≤ 45mA, Group Delay – < 5ns, Passband Ripple – ± 1dB, Gain at Zenith – + 5.5dBi, Phase Center Offset – ± 2mm |
Environmental | Operating Temperature – -40 °C to +85 °C, Storage Temperature – -55 °C to +85 °C, Humidity – 95% No-condensing, Water and Dust Proof – IP67, Drop – Survive from a 1.5m drop, Calibration – IGS, NGS |
Reviews
There are no reviews yet.