M300 Plus GNSS Receiver
M300 Plus GNSS Receiver
Description
The M300 Plus GNSS Receiver uses ComNav Technology new
generation GNSS engine, which makes it possible to keep
track of more signals from all running satellite constellations. By
using the powerful adaptive detecting and canceling
technology, the M300 Plus GNSS receiver can further enhance
anti-jamming capability to provide reliable GNSS data which is
very critical for a reference station.
Features
- Working with all running constellations
- Optimized narrow band technologies targeting higher
data quality - Compact and rugged housing with flexible interfaces
for external devices - Integrated Ethernet and 4G modem guarantees the
stability of internet communications - Easy to remote configure by built-in web server
Recommend Antenna
- AT340 Geodetic GNSS Antenna
- AT600 Choke Ring GNSS Antenna
- AT500 Choke Ring GNSS Antenna
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 22.5 × 17.6 × 6.7 cm |
| Signal Tracking | Channels – 574, GPS – L1 C/A,L1P,L2C,L2P,L5, BeiDou – B1, B2, B3, BeiDou Global Signal – B1C, B2a, GLONASS – L1 C/A, L1P,L2 C/A, L2P, Galileo – E1, E5a, E5b, QZSS – Reserved, SBAS – WAAS, EGNOS, MSAS, GAGAN, Advanced interference mitigation technology, Low noise carrier phase measurements with <1 mm precision in a 1 Hz bandwidth, High precision multiple correlators for GNSS pseudo range |
| Communications | 3 Lemo Ports – One 2-pin Lemo port for power supply and battery charging, One 7-pin Lemo port (USB UART port) for system debugging and static data downloading, One 7-pin Lemo port (RS485 Protocol) for meteorological sensor /barograph /inclinometer connection, 1 DB9 male port – Standard RS232 protocol, 1 Standard USB port – Connect with external storage card, 1 RJ45 LAN Ethernet port |
| Time Precision | GPS+GLONASS+BeiDou 20 ns |
| Data Logging | Loop recording function supports long-term recording, Support three simultaneously raw data recording, Maximum 20Hz data logging rate, Storage capacity – 32 GB internal memory Maximum 1TB external memory, File format – RINEX 3.X, 2.X or ComNav binary format, File log session – 5/10/15/20/30 min or 1/2/4/24hour, Data retrieval and transfer – FTP and USB |
| Positioning Specifications | Post Processing Static – Horizontal: 2 mm + 0.5 ppm RMS Vertical: 4 mm + 0.5 ppm RMS, Single Baseline RTK |
| Physical | Housing – Rugged aluminum housing |
| Data Format | Correction data I/O – RTCM 2.X, 3.X, RTCM3.2 MSM4, CMR (GPS only),CMR+(GPS only), Positioning data outputs – ASCII: NMEA-0183: GSV, RMC, HDT, VHD, GGA,GSA, ZDA,VTG, GST, PTNL, PJK Extended NMEA-0183: BDGGA, GPNTR,GPCDT,GPHPR, Observations – ComNav binary, BINEX, RTCM3.X, compatible with major CORS software (VRS, FKP and iMax) |
| Electrical | Power consumption – < 5 W, External power input – 7-36 VDC, with overvoltage protection |
| Environmental | Operating temperature – -40 °C to +80 °C, Storage temperature – -45 °C to +85 °C, Humidity – 100% no condensation, Waterproof and dustproof – IP67, Shock – rugged aluminum case with rubber ring seal,designed to survive a 1m drop onto concrete |
| User Interface | 4 LEDs in Front Panel, ComNav M300 Plus Web Server, CRU software |
Reviews
There are no reviews yet.