M300 Pro II GNSS Receiver

Category: Tag:

Description

M300 Pro II is enhanced in providing reliable positioning data. It
tracks 574 channels of all current and future satellites, including
GPS, GLONASS, Beidou, Beidou global, Galileo, SBAS and
L-Band. Adopted the optimized narrow band technology to
withstand interference, M300 Pro II ensures higher data quality
even near the Telecom tower.

Features

  • Optical fiber interface for configuration
  • Support plus or minus 75 volts input power
  • Built-in TF-card with password protection
  • Powerful remote control with network management
    protocols
  • Support IPV4, IPV6 protocols
  • IP67 waterproof and dustproof level for harsh
    environments
  • User-friendly front panel display
  • Integrated battery serves as primary power and
    an UPS backup

Recommend Antenna

  • AT340 Geodetic GNSS Antenna
  • AT500 Choke Ring GNSS Antenna
  • AT600 Choke Ring GNSS Antenna

Additional information

Weight 2.83 kg
Dimensions 26.7 × 17.6 × 6.7 cm
Signal Tracking

Channels – 574, GPS – L1 C/A, L1P, L2C, L2P, L5, BeiDou – B1, B2, B3, BeiDou Global Signal – B1C, B2a, GLONASS – L1 C/A, L1P, L2 C/A, L2P, Galileo – E1, E5a, E5b, QZSS – Reserved, L-Band – Optional, SBAS – WAAS, EGNOS, MSAS, GAGAN, Advanced interference mitigation technology, Low noise carrier phase measurements with <1 mm precision in a 1Hz bandwidth, High precision multiple correlators for GNSS pseudo range, Signal Noise Ratios reported in dB-Hz

Data Format

Correction data I/O – RTCM 2.X, 3.X, RTCM3.2 MSM4, CMR (GPS only), CMR+ (GPS only), Positioning data outputs – ASCII: NMEA-0183: GSV, RMC, HDT, VHD, GGA, GSA, ZDA, VTG, GST, PTNL, PJK Extended NMEA-0183: BDGGA, GPNTR, GPCDT, GPHPR, Observations – ComNav binary, BINEX, RTCM, RINEX3.X, compatible with major CORS software (VRS,FKP and iMax)

Data Logging

Loop recording function supporting long-term recording
Support five simultaneously raw data recording, Maximum 20Hz data logging rate, Storage capacity – 32 GB internal memoryMaximum 1TB external memory, File format – RINEX 3.X, 2.X or ComNav binary format, File log session – 5/10/15/20/30 min or 1/2/4/24hour, Data retrieval and transfer – FTP and USB

Time Precision

GPS + GLONASS + BeiDou 20 ns

Positioning Specifications

Post Processing Static – Horizontal: 2 mm + 0.5 ppm RMS Vertical: 4 mm + 0.5 ppm RMS, Single Baseline RTK
(<30 KM) – Horizontal: 8 mm + 1 ppm RMS
Vertical: 15 mm + 1 ppm RMS, Network RTK – Horizontal: 8 m+0.5 ppm RMS Vertical: 15 mm+ 0.5 ppm RMS, DGPS – 0.4 m 3D RMS, SBAS – 1 m 3D RMS, Standalone – 1.5 m 3D RMS

Physical

Housing – Rugged aluminum housing

Environmental

Operating temperature – -40 °C to + 65 °C, Storage temperature – -45 °C to + 85 °C, Humidity – 95% no condensation, Waterproof and dustproof – IP67, Shock – Rugged aluminum case with rubber ring

Communications

3 Lemo Ports – One 2-pin Lemo port for power supply and
battery charging One 7-pin Lemo port (USB UART port) for
system debugging and static data downloading One 7-pin Lemo port (RS485 Protocol) for meteorological sensor /barograph /inclinometer, 1 DB9 male port – Standard RS232 protocol, 1 Standard USB port – Connect with external storage card, 1 Optical fiber interface – Support IPV4, IPV6, 5 SMA male connectors – PPS output Event input Reserve for WLAN Frequency-marker oscillator input connector GPRS antenna connector, 1TNC connectors – GNSS antenna connector, 4G modem – LTE-FDD: B1/B3/B5/B8 LTE-TDD: B34/B38/B39/B40/B41 WCDMA: B1/B8 GSM: B3/B8

Electrical

Power consumption – < 5 W, External power input – ±18 – ±75VDC, with overvoltage protection, Integrated internal battery – 7.4 V, 8800 mAh, Li-ion; more than 16-hour continuously working

User Interface

Front Panel Display – 4 arrow keys and data entry Power button, Reset button and Esc button LCD display showing receiver’s status, ComNav Technology M300 Pro II Web Server, SinoGNSS CRU software

Reviews

There are no reviews yet.

Be the first to review “M300 Pro II GNSS Receiver”

Your email address will not be published. Required fields are marked *